guitar nut height

By Blue

Account limit of 2000 requests per hour exceeded.

guitar nut height

Nut height is a factor on the action of Acoustic Guitar?

I bought some peanuts for 12-String Acoustic guitar that needs working ... Walnut queue again, for example ..... I think I did it once for a Classical Guitar and it was easy ... Right? What is the best glue use?

The height of the action is highly dependent on the height of the strings on the first box. This is in line by cutting slots at the proper depth of the nut. It must be done by a professional luthier. Do not use epoxy. It is common to have to replace or adjust the nut. If resin that can affect the neck / Out Pitch to recover. Elmer using glue or similar glue. Not much. Do a calculation, I would probably say that the nut is cut correctly now. To test. Guitar string (put the dough nut, but not yet), set place, and try it. Buzz If you do not freak out and not too hard to push strings to the first box, you should be fine. Untying the strings up (a lot - it could be a little messy) Slide the nut off, coat the inside nut slot with glue and put the nut back. Try not to slip again if you can, not to push the tail Out. You can treat dry first to see if you can do (see if the strings are loose). Tip: always on my twelve-string acoustic tone of a note (D instead of E) to be easier to play and relieve some pressure on the neck. It is very common for twelve son chain neck chain.

Guitar Setup Nut Adjustment